Week 16 - Poster/Report submission + undocumented experiments

By Anonymous -

MDP Poster

We started the making of the poster that would be used together with our completed circuits to present our work done to the assessors. With the given template, we decided to showcase an overview of the Telemetry system with a brief description of each individual components. 

Figure 1: MDP - Telemetry System Poster
The poster would be vetted by our project supervisor and co-supervisor. The printing and framing of the poster would be done next week for the final showcase. 


MDP Report 

We were also tasked to complete our MDP report. The report was to detail all of our process from start to finish. to be submitted next week on Week 17. Finishing the report and constantly editing mistakes being made by John (a fake name is used to protect his identity). 

Undocumented experiments

When first starting out, we had experimented with other components that we didn't get to mention. Current Sensors
Humidity Sensors


Comments

Post a Comment

Popular posts from this blog

Transmission within the car - HC-05 & HC-06 FC114 (Bluetooth module)

By -
Image
Week 3 & Week 4 We were tasked to work on the transmission of sensor data within the car with the Bluetooth module, HC-06 FC114, hence eliminating the need of using wiring. We are tasked to use the HC-05 FC-114 (master), and HC-06 FC-114(slave) Bluetooth module and pair them up to allow the communication of Arduino through Bluetooth transmission.  http://www.martyncurrey.com/connecting-2-arduinos-by-bluetooth-using-a-hc-05-and-a-hc-06-pair-bind-and-link/ Figure 1: HC-06 FC-114 Bluetooth Modules The HC-05 module can be used to be set as either the master or the slave, while the HC-06 module can only be set as the slave module. In this case, we will be using the HC-05 as the master and the HC-06 as the slave. To do so, pairing and linking of the modules' required. It is so that the modules will connect to each other automatically when powered up. To do so, the modules first have to be powered up and connected correctly. In this case, we are using th...
Read more

Week 13 - Integration test - PLX-DAQ, Chase vehicle simulation, LoRa interface

By -
Image
We have finalized on the plan of integrating the system as shown in Figure 1 , and we will start working on it this week and the following weeks till completion. However, this is only a suggestion of our own design which may not be the actual design used for SunSPec 5, as we have yet to carry out further tests on practicality. Figure 1: Telemetry System Overview The main problem of interfacing wireless communication with Arduino is that due to the way the Arduino receives it, it will receive char by char per loop. So any other parts of code in between the sending and receiving part will be sent along each time a char is sent. For example, the word "test" is being sent, and there is another program to send a voltage value, per say "50". The receiving end will receive in the following order: " t ", "50", " e ", "50", " s ", "50", " t ", "50". There is a way to get around this ...
Read more